Model: EAM VT 3,0000 gallon carbon steel vacuum tank. Tank capacity 3,000 gallons
Tank Construction: Tank constructed from ¼”carbon steel with 1/4” heads. There will be 2- ¼” full baffles. There will be large access holes in each compartment. There will be cross members at all heads and baffles. 4” x 7” carbon steel angle solid welded to tank floor will be sills. Tank to have 66” diameter heads.
Compartments:2 (500/2000) compartments tank for waste and water.
Manways:One 20” manway to be installed on top of the tank and one 20” rear manway to be installed in the lower section of the rear head for cleanout.
Shutoff:3” low profile steel primary moisture trap to be installed on top of tank. The shutoff provides initial vacuum pump protection against contamination and damage from material carryover. Shutoff contains cage assembly with stainless steel float ball and rubber seat.
Hose Tray:One set of full length detachable carbon steel hose trays to be installed on tank.
Inlets:One 3” rear load line with 3” flange. Rear load line has a 4” standpipe to the rear of the tank with a deflector shield. 3” Brass lever valve included with camlock and dust cap.
Outlets:One 6” rear discharge with 6” flange installed in the rear of the tank. 6” Brass lever valve included with camlock and dust cap.
Ladder:One curbside ladder installed on tank to access manway.
Level Gauge:Three 5” glass bowl sight eyes installed on rear head toward street side. One dial level gauge included.
Hose Hooks:Hose hooks installed on rear head.
Lighting: LED lights with vapor proof wiring and junction boxes. Two LED rear work lights installed on upper rear head.
Paint:Tank will be sandblasted, primed and painted one color. (white)
Mounting:Mount kit supplied loose with tank.

Fabiana Vacuum tank pump


  • Eliminator package top frame mount belt drive system II with RCF 500 LUF pump

  • 1/2 HP, 1725/1425 RPM capacitor start motor with thermal overload protection
  • 1/4″ x 3/8” intake port
  • 115 Volt 60 Hertz, 230 Volt 50 Hertz
  • Standard US 220 Volt plug
  • 25 ounce (739 cc) oil capacity
  • Large, easy-to-see sight glass ensures proper oil level
  • Oil fill is isolated on cover for easy fill
  • Increased spacing between intake tee and handle for more room
  • Tethered safety cap prevents oil spills during transport
  • Heavy-duty chrome plating
  • Increased oil capacity for cooler running temperature and reduced contamination
  • Well-protected drain valve sealed with O-ring to prevent leaks
  • 2 stage direct drive to achieve deep 25 micron vacuum
  • All metal construction including all brass fittings
  • Completely field repairable


Contact us

3301NW 127 ST - Opa Locka, FL 33054